Protect yourself against pest birds

BIRDWIRE anti-bird rods are made of stainless-steel.
Their flat head has a hole with rounded edge to avoid wear on the cable caused by friction.
The other end of the rod is chamfered for easy insertion in the anchor rivet

On wide cornices where pigeons settle, 11 cm supports are recommended to vary cable heights every 0,60 m.

• Protected width : 3 cm.

BIRDWIRE anchor rivets are used to attach stainless-steel rods or round splits pins to stone, brick or other suitable materials..

They are made of highly-resistant thermoplastic nylon.

Their flattened head fits closely to the surface to be protected and the form of the fluted ridge located at the end of the rivet secures it firmly.

These springs are specially made from stainless-steel and have a small opening in the ring at one end to facilitate attachment to stainless-steel rods or round split pins.

Nickel-plated copper BIRDWIRE crimps are used to fix the cable to stainless-steel rods or to the round splits pins.

A seven-strand stainless-steel cable covered with UV-stabilised nylon, with a total diameter of 0,7 mm and a tensile strength of 22 kg.

Stainless-steel gutter rods can be used to fix the cable to the rim of virtually all gutters.
They must be attached to the gutter every 0,60 m with the bolt placed inside the gutter.

The serrated jaw of the clamp prevents the rod from sliding sideways.

• Protected width : 3 cm.

Ideal for protecting the edges of roof is fixed on the tile, spaced at intervals of 0,60 m.

• Protected Width: 3 cm.